zhulin@zozen.com
WhatsApp: 0086 18861589035
Gas steam boilers in Turkey can be used for heating, insulation, drying, heating, melting, supply production, sterilization, vulcanization, hot water supply and other production boilers. 4 tone gas steam boilers rated evaporation capacity of 4 tons per hour, can use natural gas, biogas, liquefied petroleum gas, gas and other gases as fuel, fuel in the boiler body as a suspended chamber combustion mode, rapid and full combustion;. At the same time, the boiler is equipped with a condenser secondary flue gas condensation to absorb heat, reducing the temperature of the boiler exhaust while effectively improving the overall thermal efficiency of the boiler, reducing boiler energy consumption and saving fuel consumption costs for boiler operation.
The steam heat of 4 ton WNS gas boiler is about 2.4 million calories, with a thermal efficiency of over 92%, and the low heat value of natural gas is 8600 calories. When the steam boiler is running at full load, the gas consumption in one hour is 2.4 million calories/0.92/8600=303 m³. ZOZEN’s condensing gas boilers use condensing technology to increase the feed water temperature of the softening tank, achieving energy savings of 10%. Theoretically, the gas consumption of a 4-ton gas boiler in one hour is 303-303*0.1=272.7m³.
WNS gas fired steam boilers
4 tons condensing gas steam boiler model WNS4, boiler pressure of 1.0Mpa, 1.25Mpa, 1.6Mpa, 2.5Mpa, boiler steam temperature against the above pressure values of 184, 194, 204, 226 degrees Celsius, the output steam quality is high. WNS type gas steam boiler for horizontal three-return wet-back structure design, boiler whole factory to ensure that the boiler can In addition to water supply, gas supply and electrical connection accessories, there are no other building structures and special installation procedures, and a series of testing and commissioning work is carried out before the boiler leaves the factory to ensure the quality of the boiler.
The chemical plant purchased a 4 ton WNS natural gas boiler from ZOZEN. In the process of producing a variety of fluorinated nitrobenzene products, it needs to rely on high temperature steam to provide a constant source of heat for key processes. When the customer initially proposed the boiler requirements, it required a high level of automation, energy efficiency and environmental protection, and emission standards to meet local environmental requirements.
control system of WNS gas boiler
Taking the project location into consideration, the WNS series gas-fired steam boiler with large hearth design, together with the advanced low-NOx burner, ensures the full combustion of natural gas fuel and effectively overcomes the problem of insufficient power output due to high altitude. At the same time, the low-NOx combustion technology adopted by the boiler can effectively reduce NOx emissions, helping the chemical plant to easily meet the local environmental emission standards.
At the same time, ZOZEN engineers also added energy savers and condensers at the end of the boiler flue, using the waste heat in the flue gas to raise the inlet water temperature and lower the exhaust flue gas temperature, increasing the thermal efficiency of the boiler to over 98% and providing a stable and sufficient steam output for the project. This boiler operates with a high degree of automation, and the combustion, water level, temperature and steam pressure are automatically regulated and protected, avoiding operational errors caused by human factors, in line with the customer’s requirements and the company’s philosophy. For more information about our products and projects, please contact our online customer service directly.
